View MSS21AXXX_470206.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DIP 14 SERIES REED RELAYS MSS2
s
MSS7
s
MVS2
s
MVS7
DESCRIPTION
REMtech's epoxy molded DIP 14 Series offers a variety of contacts and schematics to meet the needs of a wide range of applications. It features the MVS2/MVS7 models designed for high reliability. The MSS2/7 DIPs are 1-Form-A relays equipped with the MYAD(R) all-position mounting switch. With switching up to 50 Watts and a 4000V isolation option, the DIP 14 Series is a relay package that allows for automatic insertion directly on PCBs as well as insertion into standard 14 Pin DIP sockets.
FEATURES
s s s s s s s s s
RATINGS (@ 25o C)
Parameter Switching Voltage MSS2/MSS7 MVS2/MVS7 Switching Current MSS2/MSS7/MVS2/MVS7 Carry Current MSS2/MSS7/MVS2/MVS7 3 Amps 2 Amps 500 1000 Volts Volts Min Typ Max Unit
All position mercury contacts on some models Stable contact resistance over life 4000 VAC input-output isolation Bounce free operation High insulation resistance Switching speed up to 300Hz Long life > 1 billion operations Epoxy molded for automatic board processing FCC68 compatible (MSS2 & MSS7)
APPLICATIONS
s s s s s s s s
Switching Frequency MSS2/MSS7/MVS2/MVS7 Contact Resistance MSS2/MSS7/MVS2/MVS7
(See detailed specifications for more information.)
Automatic test equipment Process control Industrial Telecom Datacom High-end security systems Signaling Metering
200
Hz
100
m
APPROVALS
s EN 60950 certified (MVS7, MSS7) s UL Recognized
www.REMtechcorp.com
TM
1
A SUMIDA COMPANY
DIP 14 SERIES REED RELAYS MSS2
s
MSS7
s
MVS2
s
MVS7
SPECIFICATIONS
All parameters are at 25C unless otherwise stated. Operate voltage, release voltage, and coil resistance will change approximately 0.4%/C as ambient temperature varies.
MSS2
Molded 8 Pin All position Wetted contacts SYMBOL VL IL IC MIN CR DCR 108 1400 1400 TYP 200 40 N/A Hg 16 1010 1.5 3 1.2 1 MAX 500 2 3 50 100 2 4 1.75 1.50
MSS7
Molded 4 Pin All position Wetted contacts MIN 108 2000 5600 TYP 200 65 N/A Hg 16 1010 1.2 3 1.2 1 MAX 500 2 3 50 100 2 4 1.75 1.50 UNITS Volts Amps Amps Watts x106 Ops m m mgrams pF pF VDC/Peak AC VDC/Peak AC ms ms
PARAMETER
CONDITIONS Max DC/PeakAC Resistive Max DC/PeakAC Resistive Max DC/PeakAC Resistive Max DC/PeakAC Resistive Signal Level 1.0 V 10mA Rated Loads(1) 50mV, 10mA .5V, 50mA at 100Hz, 1.5 msec
Contact Ratings
Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy Static Contact Resistance Dynamic Contact Resistance Contact Material Hg Content
Relay Specifications
Insulation Resistance Capacitance Dielectric Strength Operate Time, including bounce Release Time Between all isolated pins at 100V, 25C, 40% RH Across Open Contacts Open Contact to Coil Between Contacts Contacts to Coil At Nominal Coil Voltage 10Hz Square Wave Zener-Diode Suppression IR
I/O TOP TREL
Environmental Ratings
Storage Temperature Operating Temperature Soldering Temperature Vibration Resistance (Survival) Shock Resistance (Survival) Weight Applied to pins, 5 sec. max. 10Hz - 500Hz 111ms, 1/2 Sine Wave TA TO G S -40 -38 260 2.3 +105 +75 10 30 -40 -38 260 2.3 +105 +75 10 30 C C C Gs Gs grams
(1) Consult factory for life requirements.
USA 1-877-4REMTECH Europe 32-89-328850 Japan 81-3-3667-3302 Ext. 2419 Hong Kong/China/Korea 852-2880-6773 Taiwan 886-2-2726-2177 Singapore/Far East 65-296-3388
2
A SUMIDA COMPANY
TM
DIP 14 SERIES REED RELAYS MSS2
SPECIFICATIONS
All parameters are at 25C unless otherwise stated. Operate voltage, release voltage, and coil resistance will change approximately 0.4%/C as ambient temperature varies.
s
MSS7
s
MVS2
s
MVS7
MVS2
SYMBOL VL IL IC 8 Pin DIP Wetted Contacts(3) MIN TYP MAX 1000 CR 1010 1400 1400 2 50 Hg 40 1012 0.7 1.2 3.2 1.5 1 1000(1) 2 3 50 100 2.5 2.5 MIN 1000 1010 2000 5600 -
MVS7
4 Pin DIP Wetted Contacts(3) TYP 2 50 Hg 40 1012 0.7 1.5 2.5 1.5 1 MAX 1000(1) 2 3 50 100 2.5 2.5 UNITS Volts Amps Amps Watts x106 Ops x106 Ops x106 Ops m mgrams pF pF pF VDC/Peak AC VDC/Peak AC ms ms
PARAMETER
CONDITIONS Max DC/PeakAC Resistive Max DC/PeakAC Resistive Max DC/PeakAC Resistive Max DC/PeakAC Resistive Signal Level 1.0 V 10mA 50V, 1A 500V, 100mA Rated Loads(2) 50mV, 10mA
Contact Ratings
Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy
Static Contact Resistance Contact Material Hg Content
Relay Specifications
Insulation Resistance Capacitance Between all isolated pins at 100V, 25C, 40% RH Across Open Contacts Upper Contact to Coil Closed Contact to Coil Open Contacts Contacts to Coil At Nominal Coil Voltage 10Hz Square Wave Zener-Diode Suppression IR
Dielectric Strength Operate Time Release Time
I/O TOP TREL
Environmental Ratings
Storage Temperature Operating Temperature Soldering Temperature Vibration Resistance(2) (Survival) Shock Resistance (Survival) Weight Applied to pins, 5 sec. max. 10Hz - 500Hz 111ms, 1/2 Sine Wave TA TO G S -40 -38 2.1 +105 +260 +85 10 30 -40 -38 2.1 +105 +260 +85 10 30 C C C Gs Gs grams
(1) Current limited up to 5mA, minimum 20 million operations; for further information, consult factory (2) Consult factory for life requirements. (3) Relay contains mercury welted contacts and must be mounted vertically. Pin 1 is up.
www.REMtechcorp.com
TM
3
A SUMIDA COMPANY
DIP 14 SERIES REED RELAYS MSS2
s
MSS7
s
MVS2
s
MVS7
COIL SPECIFICATIONS
Contact Form Power Units Conditions Part # MSS2 1A05 MSS2 1A12 MSS2 1A24 MSS7 1A05 MSS7 1A12 MSS7 1A24 MVS2 1A05(A,B) MVS2 1A12(A,B) MVS2 1A24(A,B) MVS7 1A05(S) MVS7 1A12(S) MVS7 1A24(S) 1-Form-A 1-Form-A 1-Form-A 1-Form-A 1-Form-A 1-Form-A 1-Form-A 1-Form-A 1-Form-A 1-Form-A 1-Form-A 1-Form-A
Coil Voltage
Coil Resistance
Operate Voltage
Release Voltage
Nominal Inpu
Volts
Volts
Volt
mW
+/- 10% (25C) Must operate by (25C)Must release by (25C) Min Typ 5 12 24 5 12 24 5 12 24 5 12 24 Max 11 21 44 11 21 43 7 15 30 7 15 30 Min Typ Max Min Typ Max 3.75 9 18 3.75 9 18 3.75 9 18 3.75 9 18 Min 0.5 1 2 0.5 1 2 0.5 1 2 0.5 1 2 Typ Max Min Typ 179 288 268 179 288 268 238 288 268 238 288 268 Max
126 140 154 450 500 550 1935 2150 2365 126 140 154 450 500 550 1935 2150 2365 94.5 105 116 450 500 550 1935 2150 2365 94.5 105 116 450 500 550 1935 2150 2365
USA 1-877-4REMTECH Europe 32-89-328850 Japan 81-3-3667-3302 Ext. 2419 Hong Kong/China/Korea 852-2880-6773 Taiwan 886-2-2726-2177 Singapore/Far East 65-296-3388
4
A SUMIDA COMPANY
TM
DIP 14 SERIES REED RELAYS MSS2
PERFORMANCE GRAPHS
MSS2/MSS7 Operate Time vs Nominal Voltage (with Diode Suppression)
3.3 3.0 2.7 2.4 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0 0 0.3 0.6 0.9
s
MSS7
s
MVS2
s
MVS7
MVS7/MSS7 Relay Internal Temperature Rise vs. Power
Temperature Rise (C) (Typ.)
50 40 30 20 10 0 0 0.2 0.4 Power (W) 0.6 0.8
Operate Time (ms)
A B 1.2 1.5 1.8 2.1 2.4
Multiple of Nominal Voltage A = +3 B = -3
MSS2/MSS7 Timing (with Diode Suppression)
3.3 3.0 2.7 2.4 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0 0 0.3 0.6 0.9 25 20 15 10 5 0 -5 -10 -15 -20 0 0.2
MSS2/MSS7 Magnetic Interference
Release Time (ms)
A B 1.2 1.5 1.8 2.1 2.4
% Change
0.4
0.6
0.8
Multiple of Nominal Voltage A = +3 B = -3
X = Distance (in.) between centers of adjacent relays. (For distance between relay bodies, subtract .400)
www.REMtechcorp.com
TM
5
A SUMIDA COMPANY
DIP 14 SERIES REED RELAYS MSS2
s
MSS7
s
MVS2
s
MVS7
MECHANICAL DIMENSIONS
0.49 (0.019) 10.16 (0.400) 15.24 (0.600)
DIMENSIONS mm (inches)
MVS2/MSS2
MVS2/MSS2
1 2 14 13
19.60 MAX. (0.772)
1 2
14 13 UP *
6 7 6.90 MAX. (0.272)
6.70 MAX. (0.264) 7.33 MAX. (0.289)
7.62 (0.300) 3.20 - 0.25 (0.125 - 0.009)
Top View
9 8
6 7 Top View
8
* MVS2 only must be mounted vertically with pin #1 UP.
8.90 MAX. (0.350)
0.28 (0.011)
MSS7/MVS7
UP
0.49 (0.019)
1 13
MSS7/MVS7
1 13
6 8
19.60 MAX. (0.772)
10.16 (0.400)
15.24 (0.600)
6.90 MAX. (0.272)
7.62 (0.300)
6.70 MAX. (0.264)
3.20 - 0.25 (0.125 - 0.009) 7.33 MAX. (0.289)
6
Top View
8
Top View
MVS7 must be mounted vertically. Pin #1 is up.
0.28 (0.011)
8.90 MAX. (0.350)
ORDERING INFORMATION
A complete part number is represented by the digits below. For example, the MVS21A05 is a model 2 MVS relay with a 1-Form A contact form, a nominal voltage of 5V and no extra options. XXXX XX XX X
Series
MSS2 MSS7 MVS2 MVS7
Options
B = Diode option S = Modified pinout (Coil at 2 & 6, contact at 8 & 14, MSS7 & MVS7 only)
Contact Form
1A = 1-Form-A
Nominal Coil Voltage
05 = 5V 12 = 12V 24 = 24V
USA 1-877-4REMTECH Europe 32-89-328850 Japan 81-3-3667-3302 Ext. 2419 Hong Kong/China/Korea 852-2880-6773 Taiwan 886-2-2726-2177 Singapore/Far East 65-296-3388
6
A SUMIDA COMPANY
TM

▲Up To Search▲

Price & Availability of MSS21AXXX

	To Download MSS21AXXX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .